Carbon Steel Pipe

Carbon Steel Pipe Manufacturer in India

Carbon Steel Pipe
Carbon Steel Pipe

Specification Of Carbon Steel Pipe

Specification ASME SA312 / ASTM A312
Finish Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF
Origin European, Japanese, Korean, US, Russian, Indian (Strictly No Chinese Material)
Test
  • Hardness Test
  • Flattening Test
  • Pitting Resistance Test
  • Chemical Analysis – Spectro Analysis
  • Micro and MacroTest
  • Flaring Test
  • Intergranular Corrosion (IGC) Test
  • Mechanical Testing Such as Tensile of Area
  • Positive Material Identification – PMI Testing
Marking All Stainless Steel Seamless Pipes are marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or according to the customer’s request.)
Thickness exact 0.25, 0.28, 0.32, 0.37, 0.41, 0.51, 0.61, 0.71, 0.91, 1.11, 1.15, 1.41 mm
size 5.0 mm – 1219.2 mm
Outside Diameter 6.00 mm OD up to 914.4 mm OD, Sizes up to 24” NB available Ex-stock, OD Size Steel Tubes available Ex-stock
Thickness Range 0.3mm – 50 mm, SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS, SCH XS
Type Seamless / ERW / Welded / Fabricated / CDW
Form Round Pipes, Square Pipes, Rectangular Pipe
Length Single Random, Double Random & Required Length End: Plain End, Beveled End, Treaded
End Protection Plastic Caps
Surface Finish: 2B, No.4, No.1, No.8 Mirror Finish for Stainless Steel Pipes, Finish as per customer Requirements
Delivery Condition Annealed and Pickled, Polished, Bright Annealed, Cold Drawn
Inspection, Test Reports Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, NABL Approved Lab Reports, Destructive Test Report, Non Destructive Test Reports
Material Test Certificates (MTC) Material Test Certificates (MTC) as per EN 10204/ 3.1B and EN 10204 3.2
Seamless Pipe size 5.0 mm – 1219.2 mm
Schedule SCH5, SCH10, SCH40, STD, SCH80, SCH160
Pipe End Plain End, Beveled End, Treaded.
Size 4 to 219mm W. T.: 0.5 to 20mm

Chemical Properties of Carbon Steel Pipe

Specification Steel grade Chemical composition Remarks
C Si Mn P S Ti
Pipes for pressure service
ASTM SA671		 CA55 0.28 - 0.98 0.035 0.035 - SA671
CB60 0.24 0.13
~0.45
CB65 0.28
CB70 0.31 1.30
CC60 0.21 0.55
~0.98
CC65 0.24 0.79
~1.30
CC70 0.27

Mechanical Properties of Carbon Steel Pipe

Steel Grade BASE METAL MECHANICAL COMPOSITION Welding point tensile strength (N/mm2) Remarks
Yield point (N/mm2) Tensile Stregth (N/mm2) Test Pieces Elongation (%)
CA55 205 380~515 - 27 380~515 SA671
CB60 220 415~550 25 415~550
CB65 240 450~585 23 450~585
CB70 260 485~620 21 485~620
CC60 220 415~550 25 415~550
CC65 240 450~585 23 450~585
CC70 260 485~620 21 485~620